background image

a low exhaust setting will help manage condensation as well (note: all trailers in 2020
and beyond are unidirectional and only operate as exhaust fans). If you hear squeaking
from the fan, we recommend running it on high for 12 hours to loosen the bearings,
(even the highest setting won’t solely run down your battery overnight).

Angled headboard for ergonomic recline includes:

o

Four standard USB ports

o

One 12V cigarette style charger

o

Fuse block (Standard ATO Fuses):

▪ Error alerts - check for a broken fuse if there are electrical issues
▪ To replace a fuse, just pop o  the front, remove the fuse, and replace
▪ 12V/USB are the most common to blow if overloaded
▪ Fuse block layout:

*

Please note, trailers prior to September 2021 may have had a 7.5 Amp fuse. We recommend

changing that to a 10 Amp fuse for increased water pump reliability.

Interior lighting is controlled by the wall-mounted remote, which has settings ranging
from 10% - 100% brightness. Low settings of 2% light can be achieved by hitting the
10% button, then continuing to hit the minus button until the lowest setting is
achieved.

Wall-mounted light switch controls both porch lights in a single on/o  position.

When storing items in the cabin interior It’s best to pack your gear tightly in one place
at a time to reduce rattling in transit. Then you can always reorganize at base camp!

Make sure cabinet door knobs are pressed in (to the “locked” position) before travel.

6

Summary of Contents for TOPO Series


















Reviews: