65
Tire Size
To maintain tire safety, purchase new tires that are the same size as the vehicle’s original tires or another
size recommended by the manufacturer. Look at the tire information placard, the owner’s manual, or the
sidewall of the tire you are replacing to find this information. If you have any doubt about the correct size
to choose, consult with the tire dealer.
Tire Tread
The tire tread provides the gripping action and traction that prevent your vehicle from slipping or sliding,
especially when the road is wet or icy. In general, tires are not safe and should be replaced when the
tread is worn down to 1/16 of an inch. Tires have built-in tread-wear indicators that let you know when it is
time to replace your tires. These indicators are raised sections spaced intermittently in the bottom of the
tread grooves. When they appear “even” with the outside of the tread, it is time to replace your tires.
Tire Balance
To avoid vibration or shaking of the vehicle when a tire rotates, the tire must be properly balanced. This
balance is achieved by positioning weights on the wheel to counterbalance heavy spots on the wheel-
and-tire assembly.
Tire Repair
The proper repair of a punctured tire requires a plug for the hole and a patch for the area inside the tire
that surrounds the puncture hole. Punctures through the tread can be repaired if they are not too large,
but punctures to the sidewall should not be repaired. Tires must be removed from the rim to be properly
inspected before being plugged and patched.
Tire Fundamentals
Federal law requires tire manufacturers to place standardized information on the sidewall of all tires. This
information identifies and describes the fundamental characteristics of the tire and also provides a tire
identification number for safety standard certification and in case of a recall.
Summary of Contents for Escape 2014
Page 3: ......
