9
Waco Instruction Manual
22. Secure the spinner cone with the two 9 x
2.5mm screws provided.
Note: Make sure you use 2.5mm screw to avoid
the spinner and propeller coming loose.
(Not to be confused with the 2mm airframe
screws)
SWITCH ON THE TRANSMITTER
23. Locate 2.4GHz. Transmitter.
24. Install 8-AA batteries (sold separately) into
the battery compartment located in back of
Transmitter case making sure they are placed
in the correct direction.
25. Turn on the transmitter by pushing the ON/
OFF sliding switch forward.
Note: Always turn your transmitter ON before you
turn your plane on.
Note: Always turn your plane OFF before you turn
your transmitter OFF.
Note: Ensure the throttle stick and trim slider
are in the down position (mode 1 shown).
The other trim sliders should all be centered
as shown.
