Net Sleeve
Net Sleeve
Spring Lock
Spring Lock
1
2
3
4
5
7
8
9
10
Spring Lock
Thickest
Thinnest
Detail A
7
1. Take out the telescoping poles out of the case.
Insert the thickest part of the telescoping pole (
#1
)
into the holes on the ends of the case (
#7
) until
you hear the spring pin lock in place. See
Figure
2
and
Detail A
.
2. Once the telescoping poles are secured in the
case, carefully pull from the top pole (
#4
) until all
the poles are extended and the spring pins
automatically lock in place. See
Figure 1
.
1
1
Figure 1
Figure 2
SET-UP:
1. Take-Down is reverse of Set-up, make sure you
store all parts back in the Storage Case.
TAKE-DOWN:
- 2 -
NOTE:
To prevent the game from
tipping over in windy conditions
or when playing on uneven
ground place a weighted object
inside the Storage Tray (#8).
NOTE
: If rubber caps (#11) are not already pre-
installed to poles (#4) slide them on the end of the
tube as shown in
Figure 1.
3. Insert the thinnest part of the telescoping pole (#4)
into the sleeve on one end of the net (#5) and then
carefully insert it on the other end. See
Figure 1
.
11
