Note:
Legs not
shown for Clarity
Figure 3
Figure 3
Figure 5
19
3
7
Detail D
7
Note
: Rotate U-Support #7 until you see the screw
hole in the slot of U-clip #3. Slide U-support #7
side to side and front to back if necessary.
6
7.
Insert Screw #19 through slot in U-Clip #3 and into U-
Support #7. Thread it all the way into U-Support #7 until it
touches the back of the tube. There should be about 3/8
inch of screw #19 left sticking out.
Do not
insert
screw#19 in middle #3 U-Clip. See
Figure 5 & Detail D.
If you want to see a video on how to insert Screw (#19) go to:
http://www.escaladesports.com/customer-service/videos.html
Or
Scan with your smartphone:
Note:
Rotate U-Support #7 until you see the screw hole in the
slot of U-clip #3. Slide U-support #7 side to side and front to
back if necessary.
Hardware Needed
19
#8-32 X 1 1/4
Phillips Head Screw
(
Qty. 2
)
Note:
To aid in assembly use a cordless drill and Phillips bit, but be
careful to not strip the screws.
Wear safety glasses
for Step 7
.
