P
R
E
-
A
S
S
E
M
B
L
Y
T
I
P
S
Sports customer service department at:
Phone:
Fax:
1-866-873-3536
E-mail:
1-800-426-1421
2020 Escalade Sports
P R E - A S S E M B L Y T I P S
1. Read this manual carefully before starting assembly.
Read each step completely before beginning each step.
2. To make assembly easier, use the Hardware Identifier on page 4 to identify and sort all fasteners. Check all cartons for kits.
All hardware may not be located in one kit.
3. Do not tighten hardware until instructed to do so. If hardware is tightened too soon, mounting holes may not align and
parts may not easily fit together. Leave locknuts slightly loose until you are instructed to tighten them.
4. Save these instructions in the event that the manufacturer has to be contacted for replacement parts.
2
GENERAL TOOLS NEEDED FOR ASSEMBLY
Level
Tape
Measure
Cordless Drill
#3 Bit
Phillips
TOOLS NEEDED FOR WOOD STUDS
Awl
Stud Finder
TOOLS NEEDED BRICK/ CONCRETE BLOCK WALL
5/16”
Masonry Bit
Rubber
Mallet
Contact Escalade
®
2L-7934-01
7/32”
(5.5mm)
Drill Bit
