User Manual
esatto.house
16
17
Installation Instructions (Continued)
This page
is intentionally
left blank
Step 4. Install the frame.
1.
Install the frame and connect the coupler plugs, making sure not
to interfere with the temperature sensor cable (See Fig. 8).
2.
Fix the screws on the frame (See Fig. 3A, 3B, 3C, 3D).
Step 5. Install the air filter and front panel.
1.
Install the air filter into the frame’s slot from upside to underside
(See Fig. 2).
2.
Hang the front panel on the frame’s buckle, then press the front
panel into the frame’s slot until you hear a click (See Fig 9).
Fig. 8
Fig. 9
Fig. 5
Fig. 6
Fig. 7
Step 3. Installation
1.
Grasp the handle on the chassis and carefully slide the air conditioner out of the cabinet (See Fig. 5).
2.
Remove shipping pad from around compressor before operation and make sure the discharge points to the
drain pan are aligned before the chassis is pushed into the cabinet (See Fig. 6).
3.
Push the unit chassis into the cabinet (See Fig. 7).
