background image

 5

Safety 

Precautions

Safety 

Read Safety Precautions Before Operation and Installation

The seriousness of potential damage or injuries is classified as either a  

WARNING

  or  

CAUTION

.

Incorrect installation due to ignoring instructions can cause serious damage or injury.

 WARNING

This appliance can be used by children aged from 8 years and above and persons with reduced 

This appliance is not intended for use by persons(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety. Children 
should be supervised to ensure that they do not play with the appliance(IEC Standard requirements).

physical, sensory or mental capabilities or lack of experience and knowledge if they have been given 
supervision or instruction concerning use of the appliance in a safe way and understand the hazards 
involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be 
made by children without supervision

(

EN Standard requirements

)

.

WARNINGS FOR PRODUCT USE

• 

If an abnormal situation arises (like a burning smell), immediately turn off the unit and disconnect 

the power. Call your dealer for instructions to avoid electric shock, fire or injury.  

• 

Do not

 insert fingers, rods or other objects into the air inlet or outlet. This may cause injury, since 

the fan may be rotating at high speeds. 

• 

Do not

 use flammable sprays such as hair spray, lacquer or paint near the unit. This may cause 

fire or combustion.

• 

Do not

 operate the air conditioner in places near or around combustible gases. Emitted gas may 

collect around the unit and cause explosion.

• 

Do not

• 

• 

Do not

 expose your body directly to cool air for a prolonged period of time.

• 

• 

If the air conditioner is used together with burners or other heating devices, thoroughly ventilate 
the room to avoid oxygen deficiency. 

Safety Precautions

Do not

allow children to play with the air conditioner. Children must be supervised around the  

unit at all times.

 operate your air conditioner in a wet room such as a bathroom or laundry room. Too 

much exposure to water can cause electrical components to short circuit.

In certain functional environments, such as kitchens, server rooms, etc., the use of specially 
designed air-conditioning units is highly recommended.

 Page 3

WARNING

This symbol indicates the possibility 

of personnel injury or loss of life.

CAUTION

This symbol indicates the possibility of 

property damage or serious consequences.

Summary of Contents for ESAC25RC













































Reviews: