User Manual
8
WARNING:
ELECTRICAL SHOCK HAZARD
Disconnect electrical power
before installing dishwasher.
Failure to do so could result in
death or electrical shock.
IMPORTANT!
The installation of the pipes and electrical equipments
should be done by professionals.
POWER CONNECTION
WARNING:
For your personal safety:
• Do not use an extension cord or an adapter plug
with this appliance.
• Do not, under any circumstances, cut or remove
the earthing connection from the power cord.
Electrical requirements
Please look at the rating label to know the rating
voltage and connect the dishwasher to the appropriate
power supply. Use the required fuse 10A/13A/16A,
time delay fuse or circuit breaker recommended and
provide separate circuit serving only this appliance.
Electrical connection
Ensure the voltage and frequency of the power being
corresponds to those on the rating plate. Only insert
the plug into an electrical socket which is earthed
properly. If the electrical socket to which the appliance
must be connected is not appropriate for the plug,
replace the socket, rather than using a adapters or the
like as they could cause overheating and burns.
Ensure that proper earthing exists before use
WATER SUPPLY AND DRAIN
Cold water connection
Connect the cold water supply hose to a threaded
3/4 inch connector and make sure that it is fastened
tightly in place.
If the water pipes are new or have not been used for
an extended period of time, let the water run to make
sure that the water is clear. This precaution is needed
to avoid the risk of the water inlet to be blocked and
damage
the appliance.
Water Supply And Drain
Cold water connection
Connect the cold water supply hose to
a threaded 3/4(inch) connector and
make sure that it is fastened tightly in
place.
If the water pipes are new or have not
been used for an extended period of
time, let the water run to make sure
that the water is clear. This precaution
is needed to avoid the risk of the
water inlet to be blocked and damage
the appliance.
safety
supply
hose
ordinary
supply
hose
About the safety supply hose
The safety supply hose consists of the double walls. The hose's system guarantees its
intervention by blocking the flow of water in case of the supply hose breaking and
when the air space between the supply hose itself and the outer corrugated hose is
full of water.
How to
c
onnect the safety supply hose
1.
Pull The safety supply hoses completely out from storage compartment located at
rear of dishwasher.
2.
Tighter the screws of the safety supply hose to the faucet with thread 3/4inch.
3.
Turn water fully on before starting the dishwasher.
WARNING
A hose that attaches to a sink spray can burst if it is installed on the same
water line as the dishwasher. If your sink has one, it is recommended that
the hose be disconnected and the hole plugged.
How to disconnect the safety supply hose
1.
Turn off the water.
2.
Unscrew the safety supply hose from the faucet.
14
INSTALLATION INSTRUCTION
Ensure the voltage and frequency of the power being corresponds to those on the
rating plate. Only insert the plug into an electrical socket which is earthed
properly. If the electrical socket to which the appliance must be connected is not
appropriate for the plug, replace the socket, rather than using a adaptors or the like as
they could cause overheating and burns.
Electrical requirements
Electrical connection
Ensure that proper earthing exists before use
About Power Connection
WARNING
For personal safety:
Do not use an extension cord or an adapter
plug with this appliance.
Do not, under any circumstances, cut or remove
the earthing connection from the power cord.
The installation of the pipes and electrical equipments should be done by professionals.
Attention
WARNING
Electrical Shock Hazard
Disconnect electrical power before
installing dishwasher.
Failure to do so could result in death or
electrical shock.
13
Please look at the rating label to know the rating voltage and connect the dishwasher
to the appropriate power supply. Use the required fuse 10A/13A/16A, time delay fuse
or circuit breaker recommended and provide separate circuit serving only this appliance.
Installation Instructions
