Esaote MyLabX6, Getting Started

Page: 46 / 124

S Y S T E M O V E R V I E W
MyLab
- G E T T I N G S T A R T E D 3 - 10
NOTE
All small connector probes can be used with probe adapter, with the
exception of transesophageal probes, phased array probes and SB2C41 Bi-
Scan probe.
Biopsy procedure can not be activated on probes connected to the system
through the probe adapter.
Fig. 3-4: Probe connectors
Probes with big connector Make sure that the connector-securing device is in the “OPEN” position,
align the pins of the two connectors and carefully attach the probe. To secure
it, move the securing device to its “LOCK” position.
Probes with small connector Connector-securing devices are placed above the probe small connectors.
Make sure that the securing device is positioned on the right (open position)
and carefully attach the probe connector by placing the cable feedthrough
downwards. To secure the probe, move the securing device towards left
(clockwise).
WARNING
Do not touch the probe connector pins or the system probes receptacle.
Never disconnect the probe while it is active. Press the
FREEZE
key before
disconnecting the probe.
CAUTION
Check to correctly align the probe connector before inserting it. Close the
connector-securing device only after having completely inserted the
connector.