Esaote MyLabX6, Getting Started

Page: 113 / 124

S Y S T E M M A I N T E N A N C E
MyLab
- G E T T I N G S T A R T E D 8 - 5
GETTI
NG STARTED
WARNING
Invisible laser radiation. Do not view directly with optical instruments.
Class 1M laser products.
Do not remove the ball from the socket.
WARNING
Do not try to disassemble the trackball during the cleaning of the
removable sealing ring.
Cleaning Probe and Gel Holders
Probe and gel holders are easily removable from their location for cleaning
and can be washed in a mild soap solution. Make sure they are completely dry
before replacing them.

PC
To clean the probes, refer to the manual “Probes and Consumables”.
Cleaning the Touchscreen
To clean the touchscreen, switch
MyLab
off, unplug it and use a soft dry cloth,
lightly rubbing the display surface. To remove stains, lightly dampen the cloth
with ethanol and water mixed in a 1:1 ratio and gently wipe the touch panel
surface; afterwards, dry the touch panel with a new dry cloth.
If strictly necessary, to clean the touchscreen during an examination, you can
temporarily lock the keyboard and the touchscreen pressing
FREEZE
while
keeping
ETO UC H
pressed. When the system is on and connected to the mains,
for safety reason, you must use only a soft dry cloth to clean the touchscreen.
WARNING
Do not spray or apply the cleaning agents directly on the touchscreen
surface as the liquid of the cleaning agents may permeate into the front
bezel of the display and cause damage.
Do not press the touchscreen with any sharp objects as this may damage
the screen.
When the system has not been unplugged, clean the touchscreen
exclusively using a dry cloth. Never use wet cloth.
Cleaning the LCD Screen
To clean the LCD use a soft dry cloth, lightly rubbing the display surface to
remove dust and other particulate matter. If necessary, apply a small amount
of ammonia- free glass cleaner onto a clean, soft cloth and then wipe the
surface.