ESAB YardFeed 200, Service Manual

Page: 5 / 30

S0740 800 148/E060619/P30
-- 5 --
cwfu2de1
TECHNICAL DATA
ESABFeed 30--2
M11
YardFeed 200
Power supply 42 V 50 -- 60 Hz 42 V 50 -- 60 Hz
Power requirement 150 VA 150 VA
Motor current I
max
3.5 A 3.5 A
Settings data
Wire feed speed
Burnback time
2/4 stroke
Creep start
Gas purge
Wire inching 1.9 -- 20.0 m/min
0 -- 0.5 s
2 stroke or 4 stroke
OFF or ON
not available
not available 1.9 -- 25.0 m/min
0 -- 0.5 s
2 stroke or 4 stroke
ON
--
--
Welding gun connection EURO EURO
Max. diameter wire bobbin 300 mm ( * 440mm) 200 mm
Wire dimension
Fe & Ss
Al
Cored wire
0.6 -- 1.2 mm
1.0 -- 1.2 mm
0.8 -- 1.2 mm 0.6 -- 1.2 mm
1.0 -- 1.2 mm
0.8 -- 1.2 mm
Weight 14.3 kg 11.3 kg
Dimensions (l x b x h) 690 x 275 x 420 mm 593 x 210 x 302 mm
Shielding gas
max pressure
All types intended for MIG/MAG
welding
5 bar
All types intended for MIG/MAG
welding
5 bar
Coolant
max pressure
60% water / 40% glycol
5 bar 60% water / 40% glycol
5 bar
Maximum permissible load at
35% duty cycle
60% duty cycle 400 A
-- --
365 A
Enclosure class
with wire bobin *440mm
IP23
IP2X
IP23
* Accessory
Duty cycle
The duty cycle refers to the time as a percentage of a ten--minute period that you can weld at a cer-
tain load without overloading.
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Equipment marked
IP23
is designed for indoor and outdoor use.
Equipment marked IP2X is designed for indoor use.