ESAB YardFeed 200, Service Manual

Page: 25 / 30

S0740 800 148/E060619/P30
-- 25 --
cwfu2ie1
OPERATION
Connections and control devices ESABFeed 30--2
M11
1 Knob for setting burnback time 7 Connection for welding gun
2 Switch for creep start OFF / ON 8 Connection (OKC), for welding current from
power source
3 Knob for setting wire feed speed. 9 Connection for control cable from power
source
4 Switch for 2--stroke / 4--stroke 10 Connection RED, for cooling water to power
source (cooling unit)
5 Connection BLUE, with ELP* for cooling
water to welding gun
11 Connection BLUE for cooling water from
power source (cooling unit)
6 Connection RED, for cooling water from
welding gun
12 Connection for shielding gas
NOTE! Cooling water connections only available on certain models.
* ELP = ESAB Logic Pump, see “Water connection” on next page.
Connections and control devices YardFeed 200
1
Connection for welding current from power
source, (OKC)
8
Safety contact switch
2 Connection for shielding gas 9 Connection for welding gun
3 Connection for control cable from power
source
10 Toggle switch for gas flushing / wire
inching
4 Connection RED, for coolant to power
source (cooling unit)
11 Toggle switch for 2 stroke/ 4 stroke
5 Connection BLUE, for coolant from power
source (cooling unit)
12 Display
6 Connection RED, for coolant from welding
gun
13 Knob for setting the voltage**
7 Connection BLUE, with ELP* for coolant to
the welding gun
14 Knob for setting wire feed speed
Note! Display (digital instrument) and coolant connections only available on certain models.
* ELP = ESAB Logic Pump, see “Water connection” on next page.
** Voltage regulation from the wire feed unit does not function with step regulated power sources.