4 INSTALLATION
0464 547 001
- 9 -
© ESAB AB 2017
Remove and attach the WeldCloud™ Mobile on the W8
2
To remove:
Grab the bottom of the WeldCloud™ Mobile and pull it slowly outwards from the
W8
2
control unit, as shown to the left in the illustration below.
To attach:
Put the WeldCloud™ Mobile straight down on the W8
2
control unit, as shown to
the right in the illustration below. Make sure that the Dual Lock fastener stems are
completely fitted.
Install WeldCloud™ Mobile with PEK
Contact your service center for guidance for the specific system configuration.
