ESAB Warrior YardFeed 200, Instruction Manual, Page: 9 / 28

2 INTRODUCTION
0463 387 131 - 9 - © ESAB AB 2015
2 INTRODUCTION
The Warrior™ YardFeed 200 and Warrior™ YardFeed 200w wire feed units are intended for
MIG/MAG (GMAW) welding together with welding power sources:
• Warrior 400i CC/CV
• Warrior 500i CC/CV
They are available in different versions, see chapter "ORDERING NUMBERS".
The wire feed units are sealed and contain a four-wheel drive wire feed mechanism as well
as control electronics.
They can be used together with wire from ESAB, standard S200 Ø 200 mm / Ø 8 inch —
7.5 kg / 15 lbs.
ESAB's accessories for the product can be found in the "ACCESSORIES" chapter of
this manual.