3 TECHNICAL DATA
0463 387 131
- 10 -
© ESAB AB 2015
3
TECHNICAL DATA
Warrior™ YardFeed 200
Power voltage
42 V, 50–60 Hz
Power requirement
252 VA
Rated supply current I
1
6 A
Settings data
Wire feed speed
1.9-25.0 m/min (75-985 inch/min)
2/4 stroke
2 stroke or 4 stroke
Wire selection / Burnback
Solid or Cored
Creep start
Always on
Gas purging
Yes
Wire inching
Yes
Torch connection
EURO
Wire bobbin: Type, Max. diameter, Max
weight
S200, 200 mm (8 inch), 7.5 kg / 15 lbs
Wire dimension
Fe
0.6–1.2 mm (0.023–0.047 inch)
Ss
0.6–1.2 mm (0.023–0.047 inch)
Al
1.0–1.2 mm (0.039–0.047 inch)
Cored wire
0.8–1.6 mm (0.031–0.063 inch)
Weight
WYF 200
12 kg (26.5 lbs)
WYF 200w
12.2 kg (26.9 lbs)
Dimensions (l × w × h)
593 × 210 × 312 mm
(23.3 × 8.3 × 12.28 inch)
Operating temperature
-10 to +40°C (+14 to 104°F)
Transport and storage temperature
-20° to +55°C (-4 to +131°F)
Shielding gas
All types intended for MIG/MAG welding
max pressure
0.5 MPA (5 bar / 72.5 psi)
Maximum permissible load at
60% duty cycle
365 A
100% duty cycle
280 A
Enclosure class
IP23
Factory standard settings
The standard factory settings for the Warrior™ YardFeed 200 are inch/min and fully open gas
valve.
Duty cycle
The duty cycle refers to the time as a percentage of a ten-minute period that you can weld or
cut at a certain load without overloading. The duty cycle is valid for 40°C (104°F).