3 INTRODUCTION
0463 341 131
- 8 -
© ESAB AB 2013
3
INTRODUCTION
3.1
Overview
The
Warrior 500i CC/CV
is a welding power source intended for GMAW welding, as well as
for welding with powder-filled cored wire (FCAW-S), for GTAW welding, for welding with
coated electrodes (SMAW) and arc air gouging.
The power sources are intended for use with the following wire feed units:
•
Warrior Feed 304
•
Warrior Feed 304w
ESAB's accessories for the product can be found in the "ACCESSORIES" chapter of
this manual.
3.2
Equipment
The power source is delivered with:
•
5 m return cable with ground clamp
•
Instruction manual
Summary of Contents for Warrior 500i CC/CV
