ESAB Powercut 900, Instruction Manual, Page: 68 / 72

68
prIMArY pOWEr BOArD ASSEMBLY
P/N 0558038355, 0558038371, 0558038356, 0558038345
SECTION 7 rEpLACEMENT pArTS
7.6 primary power Board Assembly
Before installation:
1. Disconnect input power to machine.
2. Verify position of dip switches.
Settings:
1. Verify SW1 - 1,2 dip switches are in the “closed” position for proper operation.
open
1 2
Important Note:
This replacement pc board may have a
10-32 (fine) stud for J16.
Earlier PowerCut machines and replacement pc boards
have 10-24 (course) studs. Carefully hand thread
existing nuts removed from PowerCut to determine if
changing to 10-32 (fine) nut is necessary. If yes, then
use supplied 10-32 (fine) nuts.
J16 stud