ESAB Powercut 900, Instruction Manual, Page: 41 / 72

41
2.0 general
As shipped, the PowerCut 900 is fully assembled and ready to cut after being connected to input power and a
source of compressed air. The Powercut package uses the heavy-duty PT-37 (Mechanized Plasma) torch to de-
liver cutting power for severing materials up to 7/8 inch (22 mm) thick. Refer to the following pages for descrip-
tions of the Powercut packages available as well as performance specifications.
2.1 Scope
The purpose of this manual is to provide the operator with all the information required to install and operate the
Powercut plasma arc cutting package. Technical reference material is also provided to assist in troubleshooting
the cutting package.
USE THE ESAB pT-37 pLASMArC TOrCH WITH MECHANIZED CON-
SOLES. USE Of TOrCHES NOT DESIgNED fOr USE WITH THIS CON-
SOLE COULD CrEATE AN ELECTrIC SHOCK HAZArD.
SECTION 2 DESCrIpTION
WArNINg