ESAB PowerCut 400, Instruction Manual

Page: 16 / 30

© ESAB AB 2012
- 16 -
bp28e
5 Over Temperature Indicator
When the yellow LED is lit, the working temperature has exceeded the normal
values. It is turned off when the temperature is normal.
6 Parts in Place (PIP)
When the yellow LED is lit, it indicates that there is a parts-in-place error. This
means that no nozzle was detected, or that the electrode is not retracting properly.
Turn off the power. Check that the components are properly assembled, that they
are free from excessive damage, and that the electrode can slide back and forth with
comfortable pressure from one finger. Once the source of the error has been
corrected, turn on the power again.
7 Power ON Indicator
When the green LED is lit, it indicates that the power is on.
5.2.1 Symbol key
Power Air
Temperature Fault
PIP
Parts in Place Power supply
Read the manual
GB