ESAB PowerCut 400, Instruction Manual

Page: 13 / 30

© ESAB AB 2012
- 13 -
bp28e
4.5 Connection of torch
The installation must be carried out by a professional.
A Torch power cable, violet
B Torch trigger cables, black
C Air hose to quick-connect fitting
D Torch pilot cable, red
The power source is equipped with a quick-disconnect solution for connecting and
disconnecting the torch.
1. Turn off the main switch, disconnect the power cable and the air supply.
2. Open the little left side panel by unscrewing 2 screws.
3. Insert the torch end with cable receptacle and air hose through the hole in the
front of the power source.
4. Connect the violet torch power cable by tightening 1 screw.
5. Connect the 2 black torch trigger cables.
6. Connect the red torch pilot cable.
7. Connect the air hose to the fitting.
8. Close the little left side panel.
9. Connect the power cable and turn on the main switch.
GB