ESAB Origo Mig C170 3ph, Instruction Manual

Page: 9 / 24

- 9 -
ba46e
4.4 Mains power supply
Check that the unit is connected to the correct mains power supply voltage, and that
it is protected by the correct fuse size. A protective earth connection must be made,
in accordance with regulations.
Rating plate with supply connection data
Recommended fuse sizes and minimum cable area
Mig C170 3ph Mig C200 3ph Mig C250 3ph
Voltage V 400-415V,
3
∼
50/60 Hz
400-415V,
3
∼
50/60 Hz
230 / 400-415V,
3
∼
50/60 Hz
Current A
at 100% duty cycle 4.0 5.3 12.1/7.0
at 60% duty cycle 6.1 6.8 17.6/10.2
at 35% duty cycle 8.9 10.1 25.3/14.6
Mains Cable area mm
2
4 x 1.5 4 x 1.5 4 x 2.5 / 4 x 1.5
Fuse slow A 10 10 25/16
NB: The mains cable areas and fuse sizes shown above are in accordance with Swedish regulations.
They may not be applicable in other countries: make sure that the cable area and fuse sizes comply
with the relevant national regulations.
5 OPERATION
General safety regulations for handling the equipment can be found on
page
4 . Read through before you start using the equipment!
WARNING
Rotating parts can cause injury, take great care.
WARNING
To prevent the reel from sliding off the hub: Lock the
reel in place by turning the red knob as shown on the
warning label attached next to the hub.
GB