ESAB Origo Mig C170 3ph, Instruction Manual

Page: 6 / 24

- 6 -
ba46e
Dispose of electronic equipment at the recycling facility!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical and/or
electronic equipment that has reached the end of its life must be disposed of at a
recycling facility.
As the person responsible for the equipment, it is your responsibility to obtain
information on approved collection stations.
For further information contact the nearest ESAB dealer.
ESAB can provide you with all necessary welding protection and accessories.
2 INTRODUCTION
Mig C170 3ph, Mig C200 3ph and Mig C250 3ph are step controlled power
sources of a compact design, intended for welding with solid steel, stainless steel or
aluminium wire as well as tubular wire with or without shielding gas.
It is possible to
weld with homogeneous wire/shielding gas and weld with gasless tubular wire by
switching the + and - connections on the switching terminal by the wire feed unit.
ESAB's accessories for the product can be found on page 20 .
2.1 Equipment
The power source is supplied with:
S
Welding gun
S
Return cable with return clamp
S
Shelf for gas cylinder
S
Instruction manual
3 TECHNICAL DATA
Mig C170 3ph Mig C200 3ph Mig C250 3ph
Voltage 400-415V,
3
∼
50/60 Hz
400-415V,
3
∼
50/60 Hz
230/400-415V,
3
∼
50/60 Hz
Permissible load at
100% duty cycle 100A 120A 150A
60 % duty cycle 130A 150A 190A
35 % duty cycle 170A 200A 250A
Setting range (DC) 30-170A 30-200A 40-280A
Open circuit voltage 15.5-30.6V 16.0-31.8V 15.0-37.0V
Open circuit power 310W 210W 340W
Power factor at max load 0.97 0.97 0.97
Control voltage 42V, 50/60Hz 42V, 50/60Hz 42V, 50/60Hz
Wire feed speed 1.0-17m/min 1.0-17m/min 1.0-17m/min
Burnback time 0.02-0.25s 0.02-0.25s 0.02-0.25s
GB