ESAB Origo Feed 30, Instruction Manual

Page: 6 / 19

-- 6 --
OF30e
2 INTRODUCTION
The Origo
TM
Feed 30, Feed 30w wire feed unit is intended for MIG/MAG welding
together with step controlled welding power sources, with solid steel, stainless steel,
aluminium wire and flux--cored wires.
ESAB’s accessories for the product can be found on page 18.
2.1 Equipment
The wire feed unit is supplied with:
S
Marathon PAC bracket
S
Reel adaptors
S
Instruction manual
3 TECHNICAL DATA
Origo
TM
Feed 30, Feed 30w
Power supply 42V, 1
∼ ∼ ∼ ∼
50/60 Hz
Power requirement 420 VA
Welding current @60% duty cycle 500 A
Settings data
Wire feed speed 1,5--25 m/min
Burnback time 0,0--0,7 sec
Spot welding time 0,2--5,0 sec
Welding gun connection EURO
Wire dimension range 0,8--1,6 (Fe,SS);
1,0--1,6 ( Al);
1,0--1,6 (FCW)
Shielding gas All types for MIG/MAG -- max 5 bar
Max diam. / weight of wire bobin 300 mm / 18kg
Dimensions lxwxh 700x255x420
Weight 14,8 kg (Feed 30)
with cooling liquid system 15,0 kg (Feed 30w)
Operating temperature --10 to +40
o
C
Enclosure class IP 23 (wire bobbin -- IP 2X)
Application classification
Duty cycle
The duty cycle refers to the time as a percentage of a ten--minute period that you can weld at a cer-
tain load without overloading.
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Equipment marked IP23 is designed for indoor and outdoor use.
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Apparatus marked IP2X are intended for indoor use.
GB