5 OPERATION
0558 012 634
- 15 -
© ESAB AB 2016
5
OPERATION
5.1
Overview
General safety regulations for handling the equipment can be found in the "SAFETY"
chapter of this manual. Read it through before you start using the equipment!
WARNING!
Electric shock! Do not touch the workpiece or the welding head during operation!
NOTE!
When moving the equipment, use handle intended for transportation. Never pull
the equipment by the welding torch.
CAUTION!
Before threading the wire, make sure the chisel point and burrs have been
removed from the end of the wire to prevent the wire from jamming in the torch
liner.
WARNING!
Rotating parts can cause injury, take great care.
WARNING!
Risk of crushing when replacing the wire bobbin! Do
not
use safety gloves when
inserting the welding wire between the feed rollers.
WARNING!
Do not operate the feeder with the enclosure open.
Summary of Contents for MobileFeed 301 AVS
Page 1: ...Instruction manual 0558 012 634 GB 20160229 Valid for serial no WxxK533xxxx MobileFeed 301 AVS...
Page 2: ......
Page 27: ...WIRING DIAGRAM 0558 012 634 27 ESAB AB 2016 WIRING DIAGRAM...
Page 30: ...WEAR PARTS CE PRODUCTS 0558 012 634 30 ESAB AB 2016...
