4 INSTALLATION
0558 012 634
- 14 -
© ESAB AB 2016
7.
Turn the wire feeder power switch to "ON".
8.
Check all gas connections for leaks.
WARNING!
Unless starting to weld, do not allow the welding wire to touch a grounded
metal surface. The welding wire becomes electrically hot when the
secondary contactor is closed. Keep fingers clear of the drive rolls; they will
start turning when the torch trigger is pressed.
9.
If gas shielded wires are used, adjust the gas flow meter to the desired flow rate by
closing the torch trigger switch or operating the gas purge switch.
10. Turn off the power source and the wire feeder when they are not in use.
Summary of Contents for MobileFeed 301 AVS
Page 1: ...Instruction manual 0558 012 634 GB 20160229 Valid for serial no WxxK533xxxx MobileFeed 301 AVS...
Page 2: ......
Page 27: ...WIRING DIAGRAM 0558 012 634 27 ESAB AB 2016 WIRING DIAGRAM...
Page 30: ...WEAR PARTS CE PRODUCTS 0558 012 634 30 ESAB AB 2016...
