2 INTRODUCTION
0463 279 001
- 7 -
© ESAB AB 2015
2
INTRODUCTION
The
Mig 4004i and Mig 5004i
are welding power sources intended for MIG/MAG welding, as
well as for welding with powder filled cored wire (FCAW-S) and for welding with coated
electrodes (MMA).
The power sources are intended for use with the wire feed unit Feed 3004/4804.
ESAB's accessories for the product can be found in the "ACCESSORIES" chapter of
this manual.
2.1
Equipment
The power sources are supplied with:
•
5 m return cable with earth clamp
•
5 m mains cable with 32 Amp connector
•
instruction manual for the welding power source
Summary of Contents for Mig 4004i
Page 2: ......
