ESAB fabricator 141i, Service Manual

Page: 89 / 92

ESAB FABRICATOR 141i
Manual 0-5448 10-1 ACCESSORIES
SECTION 10:
OPTIONS AND ACCESSORIES
10.01 Options and Accessories
DESCRIPTION PART NUMBER
Fusion 140A MIG Gun, 10ft (3.0m) Length
F140TA-10-3035 1017-1321
ESAB Spool Gun 160A,12ft (3.6M) Length, suits 4" (100mm) spools for alumini-
um welding
SG160TA-12-3035 1027-1390
TIG Torch, 17V, 12.5 ft, 8 pin and accessory kit with 1/16", 3/32", 1/8" thori-
ated tungstens; 1/16", 3/32", 1/8" collets; 1/16", 3/32", 1/8" collet bodies; No.
5, 6, 7 Alumina nozzle; short back cap; long back cap
W4013802
Fabricator 141i- 181i Carry Bag
W4015301
Basic 4 Wheel Cart W4014700
Foot Control for remote amperage control when TIG welding
600285
ESAB WeldSkill Auto-Darkening Helmet Skull & Fire (USA Only)
4100-1004
Drive Roll .023" - .035" (0.6-0.9mm) V groove for steel & stainless steel
W4014800
Drive Roll .023"- .030" (0.6-0.8mm) V groove for steel & stainless steel wires
[Fitted] 7977036
Drive Roll .035"/.045" (0.9/1.2mm) V groove for steel & stainless steel wires 7977660
Drive Roll .030"-.035" (0.8-0.9mm) U grooved for aluminum wires
7977731
Drive Roll .040"-.045" (1.0-1.2mm) U grooved for aluminum wires 7977264
Drive Roll .030"-.035" (0.8-0.9mm) V knurled groove for flux cored wires 7977732
Drive Roll .045" (1.2mm) V knurled groove for flux cored wire 704277
STICK KIT, 25mm DINSE
W4009401
WTL ground clamp with 16 mm
2
lead and 25 mm
2
dinse, 10ft (3.1m) long
WTL electrode clamp with 16 mm
2
lead and 25 mm
2
dinse, 13ft (4m) long
Victor Argon Flowmeter/ Regulator
0781-4169
Accessory Kit for TIG Torch with 1/16", 3/32", 1/8" thoriated tungstens; 1/16",
3/32", 1/8" collets; 1/16", 3/32", 1/8" collet bodies; No. 5, 6, 7 Alumina nozzle;
short back cap; long back cap
P062900010
Power Adapter, 115V, 20A- 15A
W4013300
Table 10-1: Fabricator 141i Options and Accessories List