ESAB ESABMig C280, Instruction Manual, Page: 11 / 24

− 55 −
2834e
6 OPERATION
General safety regulations for the handling of the equipment can be found on
page 48. Read through before you start using the equipment!
WARNING!
Rotating parts can cause injury, take great care.
WARNING − TIPPING RISK!
There is a risk of tipping while transportation and operation, if the welding machine leans
more than 10
o
. In that case appropriate securing has to be provided !
6.1 Connection and control devices
1 Mains supply switch 8 Connection for return cable ( − ), low induc-
tance
2 Switch, coarse control 9 Knob for selecting − creep start − ON/OFF
3 Switch, precise control 10 Knob for wire speed setting
4 Indicating lamp, power supply ON 11 Knob for selecting 2/4 − stroke control mode
5 Orange indicating lamp, overheating 12 Knob for burn − back time setting
6 EURO − connector (for welding gun) 13 Digital instrument − V / A
(option,see page 176)
7 Connection for return cable ( − ), high induc-
tance
14 Knob for spot welding − ON/OFF and time
setting
GB