6 CONTROL PANEL
0463 408 001
- 29 -
© ESAB AB 2017
6.2
How to navigate - EM 215ic
1.
Over temperature indication: Symbol
illuminates when product is overheated.
2.
Volt/Amp display: LED displays the Volts
and Amps values during welding. It holds
the last used parameter.
In sMIG "V" displays the wire diameter
while idle "A" displays the set wire feed
speed.
3.
Voltage knob: Adjust the voltage value (in
sMIG not functional).
4.
Knob for plate thickness or wire feed
speed: in sMIG mode (outer circle, in
yellow) plate thickness can be adjusted.
Wire feed speed can be adjused when in
manual MIG/MAG or flux cored (inner
circle, in white).
5.
Process selection knob: Enables
selection between sMIG mode (left, in
yellow) and manual MIG mode (right, in
white).
6.2.1
Symbol reference EM 215ic
Overtemperature
Volts
(manual MIG mode only)
Smart MIG
Amps
Wire diameter
(sMIG mode
only)
Wire feed speed
Manual MIG
Thickness gauge
(sMIG
mode only)
