ESAB Caddyt Tig 150i, Instruction Manual

Page: 9 / 20

E.
-- 9 --
bt26d2e
6.2 Control panel TA33
The power source checks the LEDs and all segments in the display when main
switch is turned on. The machine type and program version are also displayed.
A Mains voltage (green) LED B Data display
C Overheating (yellow) LED D Knob for setting data.
Increase (+) or Decrease (--) selected by
the function pushbuttons
6.2.1 Panel function symbols (E -- G)
TIG TIG HF 2--stroke
MMA LiftArc
t
4--stroke
G Slope down F. Gas post--flow
6.3 Overheating protection
The welding power source has a thermal overload trip which operates if the
temperature becomes too high, interrupting the welding current and lighting a
yellow indicating lamp on the front of the power source. The thermal overload trip
resets automatically when the temperature has fallen.
7 WELDING
7.1 TIG welding
During TIG welding, the return cable must be connected to (+) and the TIG torch to
(--). If they are connected in reverse, the tungsten electrode will melt.
GB