ESAB Caddyt Tig 150i, Instruction Manual

Page: 8 / 20

-- 8 --
bt26d2e
6 OPERATION
General safety regulations for the handling of the equipment can be found on
page 3 . Read through before you start using the equipment!
6.1 Connections and control devices
Make sure that the welding power source is connected to the correct supply voltage
and that it is protected by the correct fuse rating.
1 Mains switch 6 TIG torch connection (--)
2 Connection (gas bottle connector) 7 Connection for return cable (--) MMA
3 Mains cable 8 Welding cable connection (+) MMA
Connection for return cable (+) TIG
4 Connection for the TIG torch 9 Control panel (see 6.2)
5 TIG torch gas connection
7 and 8 are used for welding current supply and return cable connection during MMA
welding
GB