ESAB AristoFeed 30, Instruction Manual, Page: 19 / 44

-- 19 --
bm29d1ea
6 OPERATION
General safety regulations for the handling of the equipment can be found on
page 15. Read through before you start using the equipment!
NB!
The side panel of the wire feed unit must be closed during operation
When mounting the wire feed unit, only use the ESAB accessory, lifting eye C1, see
page 38.
To prevent the reel sliding off the hub: Lock the reel in place by turning
the red knob as shown on the warning label attached next to the hub.
WARNING!
WARNING!
Rotating parts can cause injury, take great care.
6.1 Connections and controls
1 Control panel
(see respective instruction manual)
6 Connection for welding current from the
power source (OKC)
2 Connection for remote control adapter 7 Connection for the control cable from the
power source
3 Connection for cooling water to the wel-
ding gun -- BLUE
8 Connection for cooling water to the power
source (cooling unit) -- RED
4 Connection for cooling water from the wel-
ding gun -- RED
9 Connection for cooling water from the po-
wer source (cooling unit) -- BLUE
5 Connection for the welding gun 10 Connection for protection gas
GB