ESAB AristoFeed 30, Instruction Manual

Page: 18 / 44

-- 18 --
bm29d1ea
4 TECHNICAL DATA
AristoFeed 30 AristoFeed 48
Power supply 42 V 50 -- 60 Hz 42 V 50 -- 60 Hz
Power requirement 336 VA 378 VA
Motor current 8 A 9 A
Wire feed speed 0.8 -- 25 m/min 0.8 -- 25 m/min
Welding gun connection EURO EURO
Max. diameter of wire bobbin 300 mm 300 mm
Wire dimension 0.6 -- 1.6 mm 0.6 -- 2.4 mm
Weight
basic unit
with bobbin carrier
with enclosed bobbin carrier
13 kg
16 kg
17.5 kg
18 kg
21 kg
22.5 kg
Dimensions (l x w x h)
basic unit
with bobbin carrier
with enclosed bobbin carrier
380 x 265 x 340 mm
560 x 265 x 350 mm
680 x 285 x 420 mm
380 x 265 x 340 mm
560 x 265 x 350 mm
680 x 285 x 420 mm
Enclosure class
basic unit
with bobbin carrier
with enclosed bobbin carrier
IP23
IP2X
IP23
IP23
IP2X
IP23
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Equipment marked IP 23 is designed for indoor and outdoor use.
Equipment marked IP 2X is designed for indoor use.
5 INSTALLATION
The installation must be executed by a professional.
WARNING!
This product is intended for industrial use. In a domestic environment this product may cause radio
interference. It is the user’s responsibility to take adequate precautions.
5.1 Terminating resistors
In order to avoid communication interference, the
ends of the CAN bus must be terminated by resistive
loads.
One end of the CAN bus is at the wire feed unit control panel,
which incorporates a terminating resistor. The other end is in
the power source and it must be fitted with a terminating resistor,
as shown in the diagram to the right.
GB