6 MAINTENANCE
0459 293 787
- 20 -
© ESAB AB 2018
6
MAINTENANCE
NOTE!
Regular maintenance is important for safe and reliable operation.
Only those persons who have appropriate electrical knowledge (authorised personnel) may
remove the safety plates to connect or carry out service, maintenance or repair work on
welding equipment.
CAUTION!
All warranty undertakings from the supplier cease to apply if the customer
attempts any work to rectify any faults in the product during the warranty period.
6.1
Cleaning the air filter
1.
Release the cover plate with the
dust filter (1).
2.
Swing out the cover plate (2).
3.
Remove the dust filter (3).
4.
Blow it clean with compressed air at
reduced pressure.
5.
Replace the filter with the finer mesh
on the side against the cover plate
(2).
6.
Replace the cover plate with the
filter.
