2 INTRODUCTION
0459 293 787
- 13 -
© ESAB AB 2018
2
INTRODUCTION
The
Mig 5000i
is a GMAW (MIG/MAG) welding power source, which can also be used for
SMAW (MMA) welding.
There are several variants of the power source:
• Mig 5000i
• Mig 5000i with WeldCloud™ unit
The power source is intended for use with the Aristo Feed 3004 or Aristo Feed 4004HD wire
feed units for manual welding.
The power source
Mig 5000i WeldCloud™
is combined with U8
2
and provides a control box
which enables wireless monitoring.
For more information about the feed units and WeldCloud™, refer to the Instruction manuals.
ESAB accessories for the product can be found in the "ACCESSORIES" chapter of
this manual.
2.1
Equipment
The power source is supplied complete with terminating resistor, 5 m return cable and
instruction manual.
