TECHNICAL DATA
0740 801 028
- 12 -
© ESAB AB 2017
TECHNICAL DATA
PEK
Supply voltage
42 V, 50/60 Hz
Power requirement
Max 900 VA
Engine connections adapted for ESAB's
motors
6 A 100%
Speed control
Feedback from pulse encoder
Operating temperature
-15°C to +45°C
Transportation temperature
-20°C to +55°C
Relative air humidity
Max 95%
Dimensions l×w×h
246 × 235 × 273 mm
Weight
6.6 kg
Enclosure class
IP23
Travel speed
0–200 cm/min *)
See separate instruction manual for
automatic welding machines.
Max manual travel speed
2.0 m/min
Wire feed speed
, filler wire
0–2500 cm/min *)
See separate instruction manual for wire feed
unit.
*) The setting range is dependent on the product used.
Enclosure class
The
IP
code indicates the enclosure class, i.e. the degree of protection against penetration
by solid objects or water.
Equipment marked
IP23
is intended for indoor and outdoor use.
Summary of Contents for A2-A6 PEK
