5 OPERATION
0463 613 001
- 25 -
© ESAB AB 2018
Fast motion
button (9) is used together with other buttons to increase speed.
Press the button to activate fast motion and then press manual wire feed (7,
10) or travel motion (8, 11) button. The LED on the fast motion button is lit
while fast motion is activated. Press again to deactivate fast motion.
During configuration, it is possible to confirm and save a value and return to
previous screen using the Fast motion button.
Press
Manual wire feed downwards
button (10) to feed the wire downwards.
The wire is fed as long as the button is pressed.
Press
Travel motion
(11) button to drive in the direction of welding where the
symbol is indicated on the weld equipment.
Three different welding data memories per welding head can be stored in the
control panel memory using the soft keys 1, 2 and 3 (12). The soft keys have
also varying functions depending on which menu currently is in use. The
current function can be seen from the text in the bottom row of the display.
The welding current / wire feed speed/balance knob
1
(3) is used for increasing
or decreasing set values.
The arc voltage / offset voltage knob
1
(4) is used for increasing or decreasing
set values.
The travel speed/frequency knob
1
(13) is used for increasing or decreasing
set values.
1
Only with Aristo
®
1000 in AC mode.
5.6.2
Initial configuration
At first startup after delivery, after program update and after a completed reset, the control
panel requires initial configuration. The initial configuration starts automatically.
It is possible for an authorised user to change the configuration in the
GENERAL SETTINGS
menu.
1.
Select language using the Up/Down/Right/Left buttons. Confirm with
OK
or with the
middle button.
2.
Select measurement unit using the Right/Left buttons. Confirm with
OK
or with the
middle button.
3.
Set date using the Up/Down buttons. Change between year, month and day with the
Right/Left buttons. Confirm with
OK
or with the middle button.
4.
Set time using the Up/Down buttons. Change between hours and minutes with the
Right/Left buttons. Confirm with
OK
or with the middle button.
5.
Select wire type using the Up/Down buttons. The wire types shown depend on the
welding head detected during startup. Confirm with
OK
or with the middle button.
6.
Select wire dimension using the Up/Down buttons. Confirm with
OK
or with the middle
button.
7.
After initial configuration, the control panel continues to the
SET
menu.
