manualshive.com logo in svg

ESA TF-486, User Manual, Page: 42 / 52

Share
Download
ESA TF-486 User Manual Download Page 42

BIOS SETUP

TF-486 / 36

Video Off Method : This setting controls the Video off method in power saving mode.
The default setting is “ V/H SYNC+Blank ”.  This setting disables V/H SYNC signals and
blanks the screen in power saving mode.  Other options are “ Blank Screen ” and
“ DPMS ”.

Doze Mode : Options are from “ 1 Minute ” to “  1 Hour ” and “ Disable ”. The system
speed will change from turbo to slow if no Power Management events occur for a
specified length of time. Full power function will return when a Wake-Up event is
detected.

Standby Mode : Options are from “ 1 Minute ”  to “ 1 Hour ” and “ Disable ”.  The system
speed will change from turbo to slow and the video signal will be suspended if no Power
Management events occur for a specified length of time.  Full power function will return
when a Wake-Up event is detected.

Suspend Mode : Option are from “ 1 Minute ” to “ 1 Hour ” and “ Disable ”.  The CPU
clock will be stopped and the video signal will be suspended if no Power Management
events occur for a specified length of time.  Full power function will return when a
Wake-Up event is detected.

HDD Power Down : Options are from “ 1 Minute ” to “ 15 Minutes ” and “ Disable ”.  The
IDE hard drive will spin down if it is not accessed within a specified length of time.

Wake-Up Events : When a hardware event is enabled, the occurrence of a
corresponding event will return the system to full speed.

Power Down/Resume Events : When a hardware event is enabled, the occurrence of a
corresponding event will prevent the system form entering any PM mode.

After you have made your selection in the POWER MANAGEMENT SETUP, press the
<ESC> key to go back to the main program screen.

Summary of Contents for TF-486





















































Reviews:

No comments