9
5.1 Install the driver
Connect Eryone Thinker SE to your PC/laptop via USB cable. Normally the driver
will be installed automatically, the same way as you use your keyboard. If your PC
can’t get the driver automatically, please insert the SD card to your PC with SD
card reader(Package included it).
Copy the drivers to your PC and install it.(Refer to link: https://sparks.gogo.co.nz/
ch340.html)
After downloading and installation, you will find the corresponding serial port in
windows “Device manager”
The printer is now ready to print, we can print the test gcode at first.
1) You need to insert the SD card to printer.
2) Then click LCD button→Print from SD card→Select “Test_1.gcode”
After test model is complete. You need to learn how to slice till files to be able to
print your own model.
Removing a stuck 3d print from the print surface
Turn the heat off on your heated bed and wait for it to cool. The closer to room
temperature, the easier it will be to remove.
Recommended temperature: Lower than 40°C
5. Printing
