7
Cutting the Ground
1.
To cut the ground, raise the lift arms of
the loader and tilt the attachment to the
desired angle.
2.
If operating while moving forward, lower
the lift arms of the loader until the front
cutting edge enters the ground.
3.
If operating while moving in reverse,
lower the lift arms of the loader until the
rear cutting edge enters the ground.
4.
Use the tilt and lift functions of the loader
to increase cutting depth and traction.
Keep the digging depth even in order to
obtain the desired grade angle.
Always call before you dig. When you call, you will be directed to a
location in your state/city for information about buried lines (electric, telephone, cable TV,
water, sewer, gas, etc.).
The Mini Planer is not designed to be operated on loaders with a Rated
Operating Capacity (ROC) of more than 1000 pounds.
OPERATING INSTRUCTIONS
