10
_____________________ROUTINE MAINTENANCE________________
Lower the Mini Planer so that it rests flat on the ground, set the parking brake,
shut down the engine, and remove the key be
fore leaving the operator’s station to perform
service of any kind.
It is the operator’s responsibility to make daily inspections of the loader and attachment for damage, loose
bolts, fluid leaks, or anything else that could cause a potential service or safety problem. Preventive
maintenance is the easiest and least expensive type of maintenance.
IMPORTANT:
Bolts and set screws can loosen after initial usage. After the first hour of operation check all
bolts and set screws. Continue to check for loose hardware every
10 hours
of operation.
IMPORTANT:
These are requirements. It is the responsibility of the owner/operator to make sure the
attachment is serviced on a daily basis. Improper maintenance can cause extensive damage to the
attachment and/or your equipment.
Use No. 2 lithium base gun grease when lubricating all the attachment grease fittings.
Grease (2) pivot pins of the scarifier every 10 hours.
10
LUBRICATION
No. 2 Lithium
base gun grease
