6
USER’S INSTRUCTIONS FOR MOUNTING THE MINI PLANER__
After uncrating the attachment, use the following procedure to mount the attachment to the loader.
Coupler wedges or pins must extend through the holes in
attachment. Levers must be fully down and locked. Failure to secure
wedges or pins can allow attachment to come off and cause injury or
death.
Instructions for mounting to a ride-
on mini skid loader:
1. Use the step, safety treads, and grab
handles to get on and off the loader.
2.
Sitting in the operator’s seat, lower seat bar
and fasten the seat belt and with the
controls in a neutral position, start the
engine.
3. Drive the loader to the rear of the
attachment. Put the loader quick attach
coupler into the attachment mounting
bracket.
4. Tilt the loader coupler backward a small
amount until it is fully engaged in the
attachment mounting bracket.
5. Stop the engine and engage the park
brake.
6. Exit the loader and secure the coupler
locking
mechanism
that
locks
the
attachment to the loader.
7. Mounting is now complete and you are
ready to use the attachment. Use reverse
order of above instructions to dismount
the attachment from the loader.
Instructions for mounting to a walk-
behind mini skid loader:
1.
Standing at the operator’s station with the
controls in a neutral position, start the
engine.
2. Drive the loader to the rear of the
attachment. Put the loader quick attach
coupler into the attachment mounting
bracket.
3. Tilt the loader coupler backward a small
amount until it is fully engaged in the
attachment mounting bracket.
4. Stop the engine and engage the park
brake.
5. Walk to the front of the loader and secure
the coupler locking mechanism that locks
the attachment to the loader.
6. Mounting is now complete and you are
ready to use the attachment. Use reverse
order of above instructions to dismount
the attachment from the loader.
