20
Fully Mounted Rear Frame & Transfer Case
MOUNTING INSTRUCTIONS
10. Connect the rear PTO driveline to the tractor PTO
shaft. Be sure the retaining pin snaps into position
on the PTO shaft.
The tractor must be equipped
with a working PTO shield. To avoid serious
injury or death, never adjust or move the
driveline when connected to the tractor and
the tractor’s PTO drive is engaged.
IMPORTANT:
The maximum allowable rear PTO
driveline extension is 3 inches. Extending beyond
3 inches will allow the driveline to separate and
cause equipment damage.
11. Connect the chute rotator hoses to the auxiliary
ports.
12.
Place the locking pins into the “float” position.
This will allow the snowblower to free float and
follow the contour of the ground.
IMPORTANT:
Never operate the snowblower
with the lift lock pins in the “lock” position. This
can damage the snowblower.
13. Mounting is now complete, and the snowblower is
ready for operation. Use the reverse order of
these instructions to dismount the snowblower
and push frame system from the tractor.
Summary of Contents for 725FM
