7
SET-UP ASSEMBLY
Driveline Installation
The attachment is shipped completely assembled
with the exception of the driveline. The driveline
must be installed prior to operation for the first time.
1. Position the attachment flat on the ground.
2. Remove both retaining bolts from the driveline.
3. Grease the attachment gearbox input shaft.
4. Align the driveline splines with the gearbox
splines. Slide the driveline onto the input shaft
so that the bolt holes on the driveline are aligned
with the groove on the input shaft.
5. Reinstall and tighten the driveline retaining bolts
to secure the driveline on the input shaft.
6. Connect the driveline safety shield chain to the
hole in the gearbox shield.
NOTE:
The driveline may need to be shortened.
When mounting the attachment on the tractor for the
first time, check the driveline length and shorten if
necessary (see “Instructions for Shortening the
Driveline” on page 9).
