Erreka VULCAN D VUA12, Installer Manual

Page: 47 / 104

English
Descripcion_240
.fm - 21/2/13
VULCAN D Hydraulic operator
43
DESCRIPTION OF THE PRODUCT
1
ELEMENTS OF THE COMPLETE INSTALLATION
Fig. 1
Elements of the complete installation

The safe and correct operation of the
installation is the responsibility of the installer.

For greater safety, Erreka recommends installing the
photocells (4) and (10).
E240A
TC
TA
TA
TA
TA
TC
G
INSTALLATION COMPONENTS:
1 Operator
2 Flashing light with antenna
3 Leaves
4 Exterior photocells
5 Key switch
6 Wall pushbutton
7 Control board
8 Connections box
9 Electrical installation
10 Interior photocells
11 Electrolock
12 Stop on closing
ELECTRICAL WIRING:
Element
Nº wires x section Maximum length
A: Main power supply 3x1.5mm
2
30 m
B/F: Flashing light with antenna 2x0.5mm
2
/ coaxial cable 50
k
(RG-58/U) 10 m
C: Photocells (Tx/Rx) 2x0.5mm
2
/ 4x0.5mm
2
30 m
D: Key switch 2x0.5mm
2
25 m
E: Operator 4x0.75mm
2
20 m
G: Electrolock 2x0.75mm
2
20 m

The electrolock is obligatory in
unlocked models, and also in
locked models when the leaves
are over 1.80 m long.
VERY IMPORTANT: The
TC
closing stopper and the
TA
opening stoppers must be
installed in all cases.