Tab.4
Fig.6
7 - RELAY SETTINGS
7.1 - Relay setting display
The operating mode of each relay can be displayed by the flashing of the corresponding led according the
following table:
Led ( LR od LV )
Relay operating mode
Continous light
Pulse mode
Flashing light
Bistable mode
Fast flashing light
Timered mode
7.2 - Relay operating mode setting ( pulse / bistable )
The operating mode of each relay can be set according the following procedures:
Keep PR pressed
down for 4 sec
until the led LR
turn on.
LR remains
lit
Release
PR
Within 2 sec
press again PR
LR turn off
After 4 sec LR
flashes slowly
7.2.1Change mode Red Relay : Pulse -> Bistable
LV remains
lit
Release
PV
LV turns off
7.2.3 Change mode Green Relay : Pulse -> Bistable
Keep PV pressed
down for 4 sec
until the led LV
turn on.
Within 2 sec
press again PR
After 4 sec
LV flashes
slowly
Keep PR pressed
down for 4 sec
until the led LR
turn on.
LR flashes
Release
PR
Within 2 sec
press again PR
LR turns off
After 4 sec
LR lights for
2 seconds
7.2.2 Change mode Red Relay : Bistable-> Pulse
LV flashes
Release
PV
LV turns off
7.2.4 Change mode Green Relay : Bistable -> Pulse
Keep PV pressed
down for 4 sec
until the led LV
turn on.
Within 2 sec
press PR
After 4 sec
LV lights for
2 seconds
T H E S M A R T L I V I N G
Pag. 17
WARNINGS
The receiver is sold with the pulse operating mode for the relays preset.
The modifications on the relay operating mode can be done only with the receiver push/buttons PR and PV.
1) It isn’t allowed a configuration in which both the relays are set as timered mode with different release
times. The final release time is the last one set.
2) In case of Bi Timered configuration the only setting allowed is :
Green relay = Bistable
Red relay = Timered.
