7
Check the status of the link indicator and the activity indicator LEDs. If the LEDs
are unlit, please check the LAN connection.
Green Link Light indicates good network connection.
Orange Activity Light flashes for network activity indication.
2.3
Lens Mounting
Follow the steps below to mount the C/CS Mount Lens to the camera.
Step 1:
Remove the plastic cover of the camera.
Step 2:
Remove the dustproof protective film from the CMOS image sensor.
Step 3:
For Non-ABF models, mount the C/CS Mount Adapter to the camera.
Step 4:
Attach the C/CS Mount Lens to the adapter.
C/CS Mount Adapter
Completion
2.4
Alarm I/O Connection
The camera supports one alarm input and one relay output for alarm application.
Refer to alarm pin definition below to connect alarm devices to the IP camera if
needed.
DC 12V / PoE
DC 12V / AC 24V / PoE
1. Alarm Out +
2. Alarm In
−
3. Alarm Out +
4. Alarm In
−
2.5
RS-485 Connection (DC12V/AC24V/PoE Models)
The RS-485 connector is the interface for connecting with the pan & tilt
positioning system.
6. D
−
7. D +
