6
1.4.1
Light Sensor (ABF Models Only)
For ABF models, a light sensor is located at the front of the cameras. The location
and definition of the light sensor is as below.
No.
Item
Definition
1
Light Sensor
Ambient light detection for day/night switching function.
2.
Camera Cabling
Please follow the instructions below to complete IP camera installation.
2.1
Power Connection
Please refer to section
Connectors
. Alternatively, users can power up the camera
by PoE if a Power Sourcing Equipment (PSE) switch is available. Refer to the
section below for Ethernet cable connection.
NOTE:
If PoE is used, make sure PSE is in use in the network.
2.2
Ethernet Cable Connection
To have best transmission quality, cable length shall not exceed 100 meters.
Connect one end of the Ethernet cable to the RJ-45 connector of the camera,
and the other end of the cable to the network switch or PC. The RJ-45 port
networks without routing to the outside plant.
NOTE:
In some cases Ethernet crossover cable might be needed when
connecting the camera directly to the PC.
