13
Ernitec Orion SX Series User’s Manual
www.ernitec.com
v.1.5.0912
Additionally, users can change the network Speed Dome Camera
’s network
property, either DHCP or Static IP directly in the device finding list. Refer to the
following section for changing the network Speed Dome Camera
’s network
property.
Example of Changing IP Camera
’s Network Property
Users can directly change a Network Speed Dome Camera
’s network property,
ex. from static IP to DHCP, in the finding device list. The way to change the
camera
’s network property is specified below:
Step 1:
In the finding device list, click on the network Speed Dome Camera
that you would like to change its network property. On the selected
item, right click and select <Network Setup>. Meanwhile, record the
network Speed Dome Camera
’s MAC address, for future identification.
Step 2:
The <Network Setup> page will come out. Select <DHCP>, and click
on <Apply> button down the page.
Step 3:
Click on <OK> on the Note of setting change. Wait for one minute to
re-search the network Speed Dome Camera.
Step 4:
Click on the <Device Search> button to re-search all the devices. Then
select the network Speed Dome Camera with the correct MAC
address. Double click on the IP Camera, and the login window will
come out.
Step 5:
Enter User name and Password to access the network Speed Dome
Camera.
Installing DC Viewer Software Online
For the initial access to the network Speed Dome Camera, a client program, DC
Viewer, will be automatically installed to your PC when connecting to the
network Speed Dome Camera.
If the Web browser doesn
’t allow DC Viewer installation, please check the
Internet security settings or ActiveX controls and plug-ins settings (refer to
Internet Security Settings
) to continue the process.
